SecurityMan ClockCamDVR - Manual (Page 22)

Installation
14
LED light/sound and what they represent:
In
Manual Recording: Two quick red flashes of the "Record LED" to no red light means
recording is active, solid red light means stop recording.
In
Motion Recording: Two quick red flashes of the "Record LED" to no red light means
motion recording is active; solid red light means motion detection is off.
Enabling motion or manual recording is represented by two beeps. Disabling motion or
manual recording is represented by one beep.
1. Insert an AA battery (not included) into the battery compartment located on the back of
the wall-clock, to operate the clock and insert a Micro SD (not included, support up to
32GB) into the Micro SD slot for recording. Adjust the clock using the dialer to current
time; turn clockwise to turn the clock back or counter-clockwise to turn the clock forward.
Time Adjuster Dialer
Insert AA battery
(not included)