SecurityMan ClockCamDVR - Manual (Page 19)

11
IMPORTANT : Please remember to STOP the recording process if an important event(s)
occurs to prevent overwriting of file(s). The length of time that it take for overwrite to start
varies and depends on the capacity of the TF card used and methods of recording set.
Be sure to test and know the recording duration to prevent the deletion of important data.
Button Sound : Click the ▽ button to select between button sound ON or button sound
OFF (default is ON). Button sound set to ON means when the buttons on the remote
control is pressed each time there will be a sound coming from the ClockCamDVR system
or vice versa.
SAVE : Click on the SAVE button to save the settings and then press and hold the SYNC
button located at the back side of the ClockCamDVR for 5 seconds to complete the saving
process.
IMPORTANT : After all the settings are confirmed, click the SAVE button and then press-
hold the SYNC button located at the back side of ClockCamDVR for 5 seconds to save
and synchronize the settings.
EXIT : Click on the EXIT button to exit without saving or changes.