• Create individual user accounts and determine access rights,
• Provide names for all connected computers to allow quick recognition,
• Set individual and global settings for users,
• Run various functions, such as mouse restore operation,
• Save and load AdderView CATx 1000 configuration settings, and more.

To access the configuration menu

1 If the main menu is not already displayed, press and hold

and then

press using a keyboard attached to a AdderView CATx 1000 user port.
The main menu will be displayed:

3 Use the and keys to highlight an option, then press

to select.

ADDERVIEW CATx 1000

Configuration Menu

Functions

User Preferences

Global Preferences

Setup Options

Edit Computer List

Edit User List

Edit Autoscan List

Enter-Select

F1-More menus

Esc-Quit

Firmware Version 1.01b06

Default names for
each computer port

Assistance for
keypress options

Your Login name

Connection status

Port numbers

2 Press To display the Configuration Menu:

Hotkeys
Note:

and

are the standard hotkeys and can be

altered

avoid clashes with other devices or software. If you change the hotkeys,
remember to use the new ones in place of

and

when following

the instructions in this guide.

Security
Note: If the security option has been
enabled, you will be asked for a valid
user name and password before the
main menu can be displayed.

IMPORTANT: When supplied, AdderView CATx 1000 units have
their security features disabled, which means that any attached
users have access to all connected computers and all AdderView
CATx 1000 settings. You are strongly recommended to

enable

the ‘Security’ feature

and set an access password for the ADMIN

account.

ADDERVIEW CATx 1000

User Name:

Password:

Esc-Scr Save

Availability of each
computer:
Green - available
Red - unavailable