Configuration, Overall initial configuration – Adder Technology AdderView CATx 1000 User Manual
Page 19
Configuration
Almost all configuration and operational aspects of the AdderView CATx 1000
units are controlled via
displays.
Overall initial configuration
When setting up a new installation, the following stages are recommended:
1
Enable the general ‘Security’ option
With security disabled (default setting), a local or remote user attached
to the AdderView CATx 1000 will have full and unrestricted access to all
computers and all AdderView CATx 1000 settings. In larger installations,
you are strongly recommended to enable security and set up individual user
accounts with access privileges.
2
Create an ADMIN (administration) password
All AdderView CATx 1000 units have a fixed user account that cannot be
deleted or renamed, called ADMIN. This user account is the only one that is
able to make important system changes. If you intend to use security, then it
is important to allocate a password to the ADMIN account.
3
Create user accounts and allocate access rights
Use the ADMIN account to add user profiles, passwords and access rights
for each of the system users.
4
.
When numerous computers are attached, you are strongly advised to
provide names for each, to assist with recognition.
5 Configure the required ‘
’
Use the ADMIN account to determine key AdderView CATx 1000 settings
and timing characteristics.
HT