5 led's status – Ronan X11CA User Manual
Page 11
Rev 2.0 : X11CA-IM MASTER MODULE
9
5 LED'S STATUS
? The RUN LED is a green color LED and starts flashing upon applying power to
the unit. When flashing, it indicates the power in on and the firmware is running
in the unit.
? The ERROR LED is RED and when flashes ON/OFF, it indicates one or more
than one alarm boards not responding to the master module.
? The RXD1, TXD1, RXD2, TXD2 are amber color LEDs and they indicate the
transmission and reception of data from port 1 and 2.
See also other documents in the category Ronan Equipment:
- X16PDM (53 pages)
- X120 (35 pages)
- X11SN (23 pages)
- X11CB (2 pages)
- X11CA Software Manual (65 pages)
- X11CA Hardware Manual (53 pages)
- X500F (60 pages)
- X71 (8 pages)
- X57 (8 pages)
- X55-600 Series (24 pages)
- X54-3412 (2 pages)
- X54-3402 (2 pages)
- X54-3302 (2 pages)
- X54-3224 (2 pages)
- X54-3212 (2 pages)
- X54-3202 (2 pages)
- X76CTM (38 pages)
- 7100M (2 pages)
- XSD-1000 (81 pages)
- X90 Series (20 pages)
- X96S WEIGH SCALE (68 pages)
- X96S MOLD LEVEL GAGE (61 pages)
- X96S LEVEL GAGE (56 pages)
- X96S MASS FLOW GAUGE (77 pages)
- X96S DENSITY GAGE (67 pages)
- Interface System (5 pages)
- Ion Chamber Detector (2 pages)
- Rigid Scintillation Detector (3 pages)
- Scintillation FlexDetector (3 pages)
- LS-S (2 pages)
- SA-4 (2 pages)
- GS-200 (2 pages)
- GS-400 (2 pages)
- SA-1 (2 pages)
- RLL-1_1A (2 pages)