Aastra Telecom DECT 142 - Manual (Page 53)

47
Customizing Your Telephone
Menu: Alarm
E
Press .
F
Select , and confirm this by pressing .
F
Select one of the following menu items and confirm this by pressing .
Press to activate ✔ or deactivate — the alarm. An activated
alarm appears in the display as ª .
At a given 24h time format, enter the time between 00:00 and 23:59.
At the12h time format the time can be entered between 00:00 and
11:59. The “am” or “pm” selection can be done by pressing the key 2
(indication a) or key 7 (indication p). You can select a melody for the
alarm as described below. The signal lasts approximately 60 seconds
and can be switched off by pressing any number key. Whenever an
alarm has been signaled, you have to activate any new alarm again.
Complete your input by pressing
.
If the current date and time is supplied by the system this menu
option will not be shown. Enter the current date/time. In case of time
settings in the 12h time format, the changeover between “am” and
“pm” can be done with key 2 or 7. Complete your input by pressing
.
Please note: Settings for date, time and time format can also be done
in the menu “Telephone Option”.
Use the arrow keys to select a melody for the alarm, and complete
your input by pressing
. OK
Melody
OK
Date / Time
OK
Set
OK
Alarm active
OK
OK Alarm
Menu