General Tools and Instruments PE-14 - Manual (Page 4)

SAFETY INSTRUCTIONS
ƽ
WARNING
• DO NOT attach the PE14 to the handle of any video
inspection system other than the DCS400, DCS400-05
or DCS400-09. Doing so does NOT upgrade the ETL
safety rating of that unit. Doing so also voids the
warranty of the PE14.
• If you have attached any of the three included probe
tip accessories (the 45° mirror, the magnetic pickup,
or the pickup hook), to the PE14, DO NOT use it to
inspect any equipment or area known or suspected to
contain “live” electrical wiring. Doing so could cause
an explosive short-circuit that could cause serious
equipment damage or personal injury.
• Before using the PE14 probe, carefully inspect it for
any cuts, nicks or abrasions in its insulation. If you
detect any flaws, discard the probe and purchase a
new one.
It is extremely important to inspect the
probe for flaws before each and every use.
WHAT’S IN THE BOX
The PE14 comes in a box with a package of three probe tip
accessories (a 45° mirror, a magnetic pickup, and a pickup
hook) and this user’s manual.
4