General Tools and Instruments DTH3007SD - Manual (Page 11)

If the instrument “freezes” (like a computer) and buttons become unresponsive, try
resetting the instrument by pushing the RESET button on its right side (callout 1-11 of
Fig. 1) with the end of a paper clip.
Remove the batteries when storing or not using the instrument for an extended period of time.
Do not drop or disassemble the instrument or immerse it in water.
OPTIONAL ACCESSORIES
Optional accessories available from General Tools & Instruments include:
• Type K and Type J thermocouples
• 9VDC adapter for a 110V power supply
WARRANTY INFORMATION
General Tools & Instruments’ (General’s) DTH3007SD Thermometer-Humidity Meter with
Datalogging SD Card is warranted to the original purchaser to be free from defects in
material and workmanship. Subject to certain restrictions, General will repair or replace this
instrument if, after examination, the company determines it to be defective in material or
workmanship for a period of one year.
This warranty does not apply to damages that General determines to be from an attempted
repair by non-authorized personnel or misuse, alterations, normal wear and tear, or
accidental damage. The defective unit must be returned to General Tools & Instruments or
to a General-authorized service center, freight prepaid and insured.
Acceptance of the exclusive repair and replacement remedies described herein is a
condition of the contract for purchase of this product. In no event shall General be liable for
any incidental, special, consequential or punitive damages, or for any cost, attorneys’ fees,
expenses, or losses alleged to be a consequence of any damage due to failure of, or defect
in any product including, but not limited to, any claims for loss of profits.
RETURN FOR REPAIR POLICY
Every effort has been made to provide you with a reliable product of superior quality.
However, in the event your instrument requires repair, please contact our Customer Service
to obtain an RGA (Return Goods Authorization) number before forwarding the unit via
prepaid freight to the attention of our Service Center at this address:
General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100
Remember to include a copy of your proof of purchase, your return address, and your
phone number and/or e-mail address.
11