General Tools and Instruments DCS300/DCS300-09/DCS355 - Manual (Page 11)

WARRANTY INFORMATION
THREE YEAR LIMITED WARRANTY
The General Tools & Instruments (General
® ) DCS200 Series and DCS300 Series
digital video Inspection Systems are warranted to the original purchaser to be free
from defects in material and workmanship for a period of three (3) years. Subject
to certain restrictions, General will repair or replace this instrument, if after exam-
ination, it is determined by General to be defective in material or work manship.
This warranty does not apply to damages that General determines to be from
an attempted repair by non-authorized personnel or misuse, alterations, normal
wear and tear or accidental damage. The defective unit must be returned to
General Tools & Instruments or a General authorized service center, freight
prepaid and insured.
Acceptance of the exclusive repair and replacement remedies described
herein is a condition of the contract for purchase of this product. In no event shall
General be liable for any incidental, special, consequential or punitive damages,
or any cost, attorneys fees, expenses, losses alleged to be as a consequence of
any damage due to failure of, or defect in any product including, but not limited
to, any claims for loss of profits.
TIP! Most parts of this products can be recycled.
Please refer to your local regulations for proper disposal.
RETURN FOR REPAIR POLICY
Every effort has been made to provide you with a reliable, product of superior qual-
ity. However, in the event your instrument requires repair, please contact our Cus-
tomer Service to obtain a RGA# (Return Goods Authorization) before forwarding the
unit via prepaid freight to the attention of our Service Center at this address:
General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100
Remember to include a copy of your proof of purchase, your return address, and
your phone number and/or e-mail address.
11