General Tools and Instruments DCS1500 - Manual (Page 5)

User Guide User Guide
Video Recording
1. Press button to start video recording.
Image Status: sign will appear at the left bottom of the screen.
2. Press button again to stop recording.
Image Status: sign disappears.
Note: User may return to Preview Mode anytime by pressing button regardless of working under Browse
mode or Manual mode.
Viewing photos/videos
1. Press or during preview mode.
Image Status: Display the latest photo/video.
2. Press or again to view the oldest or second to last photo/video.
Image Status: All files will be stored according to the time sequence of photo capture/video recording.
Note: When viewing videos, the video will be displayed automatically until it ends and then the next photo or video
will be displayed.
(P.6)
(P.9)
/
(Figure.8)
(Figure.8)
(Figure.7)
(Figure.6)
Operating Instructions
Power On/Off
STEP1: To turn the console on, press the power button for 3~5 seconds until you see the sign below
appear on your monitor.
( SD card memory capacity Battery capacity)
STEP2: Press the power button for 3~5 seconds to turn the console off.
Adjust the brightness
When the objects on the screen or "fully-blank (light over)", it might be because the light source is too
bright. In this case, please turn the light switch counterclockwise to reduce the brightness. Turn the light
switch clockwise to increase the brightness.
Taking Photos
Press button during Preview mode to take the photo.
Or, continue pressing the button to show the photo that has just been taken.
Image Status: Returns to Preview Mode automatically after photo is taken.
ESC