General Tools and Instruments DCS1500 - Manual (Page 3)

User Guide User Guide
Multi-function keys
Each console button performs a unique function depending upon the Mode in which the system is being
operated
Push-Buttons Preview Mode Browse Mode Manual Mode
Switch to Browse Mode to view
photos and videos.
Move to previous photo or
video.
Move upward through the main
manual.
Switch to Browse Mode to view
photos and videos.
Move to next photo or
video.
Move the light bar downward.
Enter Manual Mode. Delete photo or video. Execute selected command.
Return to Preview Mode. Return to Preview Mode. Return to Preview Mode.
Capture a .jpg photo View the next photo or
pause/play video clips.
Display various data for repair
Start and stop video recording Return to Preview Mode Return to Preview Mode
First Time Use
STEP 1-Insert the insert tube into the connector according to the direction of the arrow and tighten the
screw nut.
STEP 2-Press and hold down the power button on the console for 3 seconds until the image is displayed
on the monitor.
STEP 3-Aim the camera lens at the selected object. Press SNAP to capture a .jpg image, or RECORD to
begin recording a .asf video.
System Modes
The DCS1500 provides three simple working modes: Preview, Browse and Manual Mode.
Preview Mode The Preview Mode is activated as soon as the unit is turned on. The image received by the
camera is displayed in real time on the video monitor. The user can capture photos and
record video while in the Preview Mode.
Browse Mode In Browse Mode, users may view photos and video, and conduct basic file maintenance.
Manual Mode In Manual Mode, users may customize their set up preferences.
Note: The system returns to Preview Mode automatically after 10 seconds without any response in Manual Model.
OK
ESC