General Tools and Instruments DCS1500 - Manual (Page 6)

User Guide 0 User Guide
Viewing on a TV monitor
1. Plug the included AV cord into the AV socket located on the right side of the console.
Notice: Please plug the other end of the AV cord into the “AV in” socket on the
external monitor.
2.Press
3.Press or to move to “Video output” option.
4.Press
Image Status: image will be transmitted to the external monitor.
Setting video format
1.Press
2.Press or to move to “Video Format” option.
3.Press
4.Press or to select NTSC/PAL.
5.Press
Setting Time/Date
1.Press
2.Press or to move to Date/Time command.
3.Press to initiate the command.
4.Press to increase the number or to decrease.
5.Press for next adjustment.
6.Repeat step 4 and 5 until the correct time/date are set.
7.Press to complete the set up.
Setting Time Display
1.Press
2.Press or to move to “Date/Time” command.
3.Press
4.Press or for “Display” option.
5.Press to switch the “Display” function between ON/OFF.
Image Status: Press once for ON, press again for OFF.
6. Press to complete set up.
7. Press to return to Preview mode.
DISPLAY NOT DISPLAY
000/0/0 0::
(P.10) (Figure.10)
(Figure.9)
TIME SET TIME SET
MANUAL
DELDTE ALL
VIDEO OUTPUT
DATE/TIME SETUP
LANGUAGE
VIDEO FORMAT
AUTO POWER OFF
MENU
2000/02/14
17:30:51
DISPLAY
OFF
(Figure.12)
TIME SET TV OUTPUT
NTSC
PAL
MANUAL
DELDTE ALL
VIDEO OUTPUT
DATE/TIME SETUP
LANGUAGE
VIDEO FORMAT
AUTO POWER OFF
MENU
(Figure.11)
OK
OK
OK
OK
OK
OK
ESC
OK
OK
OK
OK
OK