General Pump LK Repair Manual - Manual (Page 43)

GENERAL PUMP
A member of the Interpump Group
LK SERIES
Page 43
Separate the gasket support from the liner by using a compass spanner with Ø 5 round ends, available on
the market, (pos. 1, fig. 145) and unscrew the support until it is completely removed (pos. 1, fig. 146).
To remove the low pressure gasket, use a feeler gauge or other tool that does not damage the gasket
support seat (pos. 1, fig. 148).
Manually remove the head rings, the pressure gaskets and the restop rings (pos. 1, fig. 147).