General Pump LK Repair Manual - Manual (Page 30)

GENERAL PUMP
A member of the Interpump Group
LK SERIES
Page 30
Tighten the screws with a torque wrench, as shown in section 3, “Screw Tightening Settings”.
Mount the shaft end cover and affix it to the casing using 3 M8X20 screws (pos. 1, fig. 101). Tighten the
screws with a torque wrench, as shown in section 3 “Screw Tightening Settings”.
Apply the lug to the PTO shaft (pos. 1, fig. 102).