beautypg.com

Lk series – General Pump LK Repair Manual User Manual

Page 15

background image

GENERAL PUMP

A member of the Interpump Group

LK SERIES

Slip out the pin (pos. 1, fig 44) and take out the connecting rod (pos. 1, fig. 45).

To separate the stem from the piston head, it is necessary to unscrew the hexagonal-head M10 screw using

a no. 17 socket wrench (pos. 1, fig. 46).

Complete the disassembly of the mechanical parts by removing the oil level lights and the eyebolts.

2.1.2 Assembling the Mechanical Parts

Proceed with the assembly, following the reverse of the procedure shown in 2.2.1/ The correct sequence is as

follows:

Attach the two oil level lights and the two oil drain plugs (pos. 1 and 2, fig. 47).

Page 15