Finish Thompson PFV - Manual (Page 6)

PUMP SPECIFICATIONS
MODEL PFM MODEL PFP MODEL PFV
Outer Tube Diameter 2” (51 mm) 2” (51 mm) 2” (51 mm)
Discharge Spout Variable orifice barb fitting Variable orifice barb fitting Variable orifice barb fitting
Discharge Thread 1-1/4” NPSM 1-1/4” NPSM 1-1/4” NPSM
Max. Specific Gravity 1.83 1.83 1.83
Max. Viscosity 2000 cP 2000 cP 2000 cP
Min./ Max. Fluid
Temperature 35°F Minimum to 160°F Maximum 35°F Minimum to 160°F Maximum 35°F Mininum to 120°F Maximum*
(1.6°C Minimum to 71°C Maximum) (1.6°C Minimum to 71°C Maximum) (1.6°C Minimum to 49°C Maximum)
Wetted Materials Polypro, FKM, PTFE, ETFE, 316 SS Polypro, FKM, PTFE, ETFE, Alloy 625 (PFP) Unfilled Polypro, PVDF, FKM, PTFE, ETFE, Alloy 625
*PFV-72: 35°F Min. to 115°F Max. (2°C Min. to 49°C Max.)
4