Finish Thompson GP11 SERIES - Manual (Page 6)

TECH SERVICE 1-800-888-3743
Literature ID No. FT00-788H
Part Number J102486, Rev 14, 3-26-13
OTHEr FTI prOducTS
Drum transfer Pumps are available in sanitary construction, stainless
steel, polypropylene and CPVC. Flows to 40 gpm, discharge heads to
80 feet and viscosities to 100,000 cP.
Portable mixers for turbine mixing and blending handle viscosities to
1,000 cP with gentle, non-vortex circulation. Available in 316 stainless
steel construction.
sealed Centrifugal Pumps in polypropylene, CF PVDF, 316 ss, and
hastelloy C come with a wide variety of sealing materials. Flows to 250
gpm, discharge heads to 130 feet and temperatures to 200°F (104°C).
sealless mag Drive Centrifugal Pumps in polypropylene, CF PVDF and
ductile cast iron. Flows to 330 gpm and discharge heads to 325 feet.
handle temperatures up to 220°F (104°C) and have 30 minute run-dry
capability. mount to standard frame motors.
For further information, contact Finish thompson inc. or your local distribu-
tor.
WArrANTY
Finish thompson, inc (manufacturer) warrants this pump product to be
free of defects in materials and workmanship for a period of one year
from date of purchase by original purchaser. if a warranted defect,
which is determined by manufacturer’s inspection, occurs within this
period, it will be repaired or replaced at the manufacturer’s option,
provided (1) the product is submitted with proof of purchase date and
(2) transportation charges
are prepaid to the manufacturer. liability
under this warranty is expressly limited to repairing or replacing the
product or parts thereof and is in lieu of any other warranties, either
expressed or implied. this warranty does apply only to normal wear of
the product or components. this warranty does not apply to products
or parts broken due to, in whole or in part, accident, overload, abuse,
chemical attack, tampering, or alteration. the warranty does not apply
to any other equipment used or purchased in combination with this
product. the manufacturer accepts no responsibility for product dam-
age or personal injuries sustained when the product is modified in any
way. if this warranty does not apply, the purchaser shall bear all cost
for labor, material and transportation.
manufacturer shall not be liable for incidental or consequential damages
including, but not limited to process down time, transportation costs,
costs associated with replacement or substitution products, labor costs,
product installation or removal costs, or loss of profit. in any and all
events, manufacturer’s liability shall not exceed the purchase price of
the product and/or accessories.
cHEMIcAL rEAcTION dIScLAIMEr
the user must exercise primary responsibility in selecting the product’s
materials of construction, which are compatible with the fluid(s) that
come(s) in contact with the product. the user may consult Finish
thompson, inc. (manufacturer) and a manufacturer’s representative/
distributor agent to seek a recommendation of the product’s material of
construction that offers the optimum available chemical compatibility.
however neither manufacturer nor agent shall be liable for product
damage or failure, injuries, or any other damage or loss arising out of
a reaction, interaction or any chemical effect that occurs between the
materials of the product’s construction and fluids that come into contact
with the product’s internals.
OrdErINg SpArE pArTS
spare parts can be ordered from your local distributor. Always refer
to pump model number to avoid error.