Farm Star T55-74 - Manual (Page 41)

3 40
Inspect the tiller thoroughly after assembly to be certain
it is set up properly. The following checklist is a reminder
of points to inspect. Check off each item as it is found
satisfactory or after proper adjustment is made.
h Check operator's manual and familiarize the opera-
tor with all sections of it.
h Check that all safety shielding is in place.
h Check all bolts to be sure they are tight or adjusted
properly at hinged locations.
h Check that all cotter pins are properly installed.
h Check PTO driveline. Make sure it is the correct
length to operate tiller with intended tractor.
h Check that all lubrication points with grease fittings
have been lubricated.
h Check that blades have been properly installed.
Check all blade bolts.
h Check that chain drivebox is properly serviced and
seals are not leaking.
h Check shear bolt for proper grade and installation.
h All safety signs (decals) in place and readable.
h When the implement is transported on a road or
highway at night or during the day, safety devices
should be used for adequate warning to operators of
other vehicles.
C H E C K L I S T
I M P O RTA N T !
Chain drivebox and gearbox was filled at factory. It must be checked before
operating. Fill to proper level with SAE 90 oil. Failure to service will result in damage
to chain drive, bearings, and gearbox.
U Keep children away from danger all day, every day.
U Equip tractors with roll-over protection (ROPS) and keep all machinery
guards in place.
U Please work, drive, play, and live each day with care and concern for your
safety and that of your family and fellow citizens.
M O D E L T 5 5
G E A R B O X
PA RTS VIEW
&
PA RTS LIST