beautypg.com

Farm Star PBX-42 User Manual

Landscape rake box scraper, Owner’s / operator’s manual model no.’s, Caution

background image

OWNER’S /

OPERATOR’S

MANUAL

MODEL NO.’s

PLR-48 PLR-72
PLR-60 PBX-42

CAUTION

For Safe Operation

Read Rules And

Instructions Carefully

SINO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.

Safety Instructions

Assembly & Mounting

Tractor Preparation

Maintenance

Operating Instructions

Repair Parts

ATV or Garden Tractor

LANDSCAPE RAKE

BOX SCRAPER

4 ft. Landscape Rake Shown

42” Box Scraper Shown

OWNER’S /

OPERATOR’S

MANUAL

MODEL NO.’s

PLR-48
PLR-60
PLR-72
PBX-42

WHEN ORDERING

REPAIR PARTS, ALWAYS

GIVE THE FOLLOWING

INFORMATION:

1. PART NUMBER
2. PART DESCRIPTION
3. MODEL NUMBER
4. NAME OF ITEM

MARCH 2001

WS-RP012-OG

WORKSAVER LIMITED WARRANTY

W orksaver

warrants its implements, parts and accessories to be free from defects

in materials and workmanship for a period of six (6) months from date of purchase.
Upon written approval,

W orksaver

will repair or exchange without charge any part,

which upon examination by

W orksaver

or its authorized agent, shall disclose to be

defective.

This does not apply to (1) parts that have worn out in normal use, (2) parts broken

because of improper assembly or operation by the customer, (3) parts accidentally
damaged, (4) failure of parts traceable to improper care, (5) parts failing through use
of implement for purposes other than those for which it was designed.

The obligations assumed by

W orksaver

and the limitations expressed herein are in

lieu of all other warranties expressed or implied.

W O R K S AVER, INC.

P.O. BOX 100 LITCHFIELD, IL 62056-0100 (217) 324-5973

WEB: http:// www.worksaver.com E-MAIL: [email protected]

Please work, drive, play and live each day with
care and concern for your safety and that of your
family and fellow citizens.

MAKE EVERY DAY

A HOLIDAY FROM ACCIDENTS

P U L L T Y P E L A N D S C A P E R A K E

P U L L T Y P E B O X S C R A P E R

S A F E T Y P R E C A U T I O N S

MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.

AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.

• Machinery should be operated only by those who are

responsible and are authorized to do so.

• Stop the engine, lower all equipment, lock the brakes,

and remove the ignition key before dismounting from the
tractor.

• Never stand between tractor and implement while tractor

is being backed to hitch.

• Loose fitting clothing should not be worn, to avoid catch-

ing on various parts.

• Detach implement in area where children normally do not

play.

• When performing adjustments or maintenance on an

implement, first lower it to the ground or block it securely
at a workable height.

• Only a qualified operator should be permitted on tractor

when in operation; no riders allowed.

• Make certain everyone is in the clear before starting

tractor or raising or lowering equipment.

• Operate the tractor and implement only while seated in

the driver’s seat.

• Reduce speed when transporting mounted implements to

avoid bouncing and momentary loss of steering control.

• A heavy load can cause instability of the tractor. Use

extreme care during road travel. Slow down on turns and
watch out for bumps. Tractor may need front counter-
weights to counter-balance the weight of the implement.

• Reduce speed on hillsides or curves so there is no

danger of tipping.

• Avoid driving too close to the edge of ditches or creeks.

• Do not transport implement on public roads without

reflectors and slow moving vehicle emblem in daylight
and with approved warning lights at night and other
periods of poor visibility.

• Due to the width of some implements, use extra caution

on highways, farm roads, and when approaching gates.

• Always be sure the implement is in the proper position for

transport.

• Keep alert and watch the front as well as the rear when

working with the implement.

C A U T I O N

THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD

BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE

1. Select an area for assembly that is clean and free of any

debris which might cause persons working on the
assembly to trip.

2. Do not lift heavy parts or assemblies. Use crane, jack,

tackle, fork trucks or other mechanical devices.

3. Preview the assembly instructions in your operator’s

manual before proceeding further.

4. If the assembly instructions call for parts or assemblies to

be blocked up, use only blocking material that is in good
condition and is capable of handling the weight of the
assembly to be blocked. Also insure that the blocking
material is on a clean, dry surface.

5. Never put hands, or any part of body, under blocked up

assemblies if at all possible.

6. After completing assembly, thoroughly inspect the

machine to be sure that all nuts, bolts, hydraulic fittings
or any other fastened assemblies have been thoroughly
tightened.

7. Before operating the machine, thoroughly read the

operation section of your operator’s manual.

8. Before operating, read the maintenance section of your

operator’s manual to be sure that any parts requiring
lubrication, such as gearboxes, are full, to avoid any
possible damage.

9. Before operating equipment – If you have any

questions regarding the proper assembly or
operation, contact your dealer or representative.

STATEMENT

OF POLICY

It is the policy of Farm Star

to improve its products
where it is possible and practical
to do so. Farm Star
reserves the right to make
changes or improvements in
design and construction at any
time, without incurring the obliga-
tion to make these changes on
previously manufactured units.

This manual is related to the following products: