Fairbanks Tundra Series Truck Scale - Manual (Page 18)

Section 3: Pre-Installation
12/12 18 51193 Revision 5
3.4.2. Assembly Tools

A mobile crane
─ Four equal length twenty foot (4-20 ft.) lifting chains or cables with hooks.
IMPORTANT NOTE: The installer
MUST reserve Crane and Chains/Cables in
advance from a local rental service company.
• Hand tools
• Hydraulic jacks
─ Two – twenty ton (2−20 ton) jacks
• Load Cell Locating Tools, one for each
load cell, available for purchase through
Fairbanks Customer Service
• Come-Along (1-Ton min.)
• 2 - Sledge Hammers (5 & 10 lb.)
• Claw Hammer
• 6’ Pinch Bar
• 3’ Crow Bar
• Drift Pins
• Torque or Impact Wrenches (500 ft. lb.)
• Open End Wrench
• Adjustable Crescent or Monkey Wrench
• Trowels (2)
• Pipe Wrench
3.4.3. Materials
• Quality vehicle wheel bearing grease
• Anti-seize
─ Found at local Automotive Parts & Supply retailer.
MUST reserve a Crane in advance.