Fairbanks Tundra Series Truck Scale - Manual (Page 14)

Section 2: Company Service Information
12/12 14 51193 Revision 5
2.1.1. Service Technician’s Responsibilities
 All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the original installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability to
be adjusted or calibrated to performance specifications may be charged to
warranty.
 The equipment consists of printed circuit
assemblies which must be handled using ESD
handling procedures, and must be replaced as
units.
─ Replacement of individual components is not
allowed.
─ The assemblies must be properly packaged in
ESD protective material and returned intact for
replacement credit per normal procedures.
2.1.2. Users’ Responsibility

Absolutely no physical,
electrical or program
modifications other than
selection of standard options
and accessories are to be
made to this equipment.