Fairbanks Trident Precast Concrete Deck Truck Scale - Manual (Page 8)

Section 2: Company Service Information
04/11 8 51255 Rev. 2
OVERVIEW
Physical Installation Notes
•
Check all devices for proper operation. If any error messages occur, refer to
Troubleshooting or the proper manual of that device.
•
Only those charges which are incurred as a result of the equipment's
inability to be adjusted to performance specifications may be charged to
warranty.
•
No physical alterations (mounting holes, etc.) are allowed during installation.
The installing technician is responsible that all personnel are
fully trained and familiar w ith the equipment's capabilities and
limitations before the installation is considered complete.
•
All electrical assemblies must be replaced as assemblies or units.
─ Replacement of individual components is not allowed.
─ These components must be returned intact for replacement credit per normal
procedures.
• All electronic and mechanical adjustments are considered to be part of the
installation, and are included in the installation charge(s).
─ Included is any required computer programming or upgrades.
─ Included are any accuracy and/or operational specification changes.
•
The AC receptacle / outlet shall be located near the Instrument and easily
accessible.
•
Electrical connections other than those specified may not be performed.
Conferring w ith our Client
•
The technician must be prepared to recommend the arrangement of components
which provide the most efficient layout, utilizing the equipment to the best
possible advantage.
•
The warranty policy must be explained and reviewed with the customer.