Fairbanks Trident Precast Concrete Deck Truck Scale - Manual (Page 10)

Section 2: Company Service Information
04/11 10 51255 Rev. 2
Equipment Checkout
Position the equipment with these points in mind:

Intense direct sunlight can harm the display.

Do not locate near magnetic material or equipment/Instruments which use
magnets in their design.

Avoid areas which have extreme variations in room temperatures. Temperatures
outside the Instrument’s specifications will affect the weighing accuracy of this product.

Do not load the platform if there is any evidence of damage to the platform or
supporting structure.
Users’ Responsibility

All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability to be
adjusted or calibrated to performance specifications may be charged to warranty.

Absolutely no physical, electrical, or program modifications other than selection of
standard options and accessories are to be made to this equipment.

The equipment consists of printed circuit assemblies
which must be handled using ESD handling
procedures, and must be replaced as units.
─ Replacement of individual components
is not allowed.
─ The assemblies must be properly packaged in ESD
protective material and returned intact for
replacement credit per normal procedures.