Fairbanks 5260 Series Unirail - Manual (Page 7)

Prior to installation, it must be verified that the equipment will satisfy the
customer's requirements as supplied, and as described in this manual. If
the equipment cannot satisfy the application and the application cannot
be modified to meet the design parameters of the equipment, the
installation should not be attempted.
1. These instructions apply to the Unirail only; installation procedures for
the Digital Weight Indicator and any other peripherals are given in
manuals specifically provided for those units. Theinstructions include a
pre-installation checkout, which must be performed before the
equipment is placed in service.
2. All electronic and mechanical calibrations and or adjustments required
to make this equipment perform to accuracy and operational
specifications are considered to be part of the installation, and are
included in the installation charge. Only those charges which are
incurred as a result of the equipment's inability to be adjusted or
calibrated to performance specifications may be charged to warranty.
3. Absolutely no physical or electrical modifications are to be made to
this equipment. Electrical connections other than those specified may
not be performed, and no physical alterations (mounting holes, etc.) are
permitted.
4. The installing technician is responsible to make certain that personnel
are fully trained and familiar with the capabilities and limitations of the
equipment before the installation is consideredcomplete.
The complete installation consists of:
1. Verifying the application
2. Unpacking
3. Inspection
50019 7 03/12 - Rev. 8
A.
General Service
Policy
B.
Overview
Section 2: Installation