Fairbanks 5260 Series Unirail - Manual (Page 5)

The Unirail is an electronic weighing device designed for use with
existing overhead monorail systems in the meat processing industry.
The scale is constructed of Type 304 stainless steel. It is fully electronic
in design with the live rail supported at each end by a strain gauge
loadcell. The scale meets the criteria for both NIST Handbook 44 and
USDA Packers & Stockyards Administration requirements, but is not
NTEP approved. Read these instructions carefully before installing and
operating this scale.
Capacity: 1,500 lbs X .5 lbs (1)
Minimum Graduation: .5 lb (2)
Minimum Tare: .1 lb (2)(3)
Note:
(1) Do not exceed single cell load of 1250 lbs.
(2) Equivalent to the weight indicators capability. Other combinations subject to special
inquiry.
(3) All monorail scales operated under USDA jurisdiction are required to have tare
settings to 0.1 lbs.
50019 5 03/12 - Rev. 8
A.
Introduction
B.
Specifications
and
Requirements
Section 1: General Information