Fairbanks 1100 Series Portable Utility Scale with Rechargeable battery-powered FB1100 ABS - Manual (Page 8)

Section 2: Service Policy Information
02/2011 8 51260 -- Rev. 1
2.2. Conferring with our client
 The technician must be prepared to recommend the arrangement of components which
provides the most efficient layout, utilizing the equipment to the best possible advantage.
 Explain and review the warranty policy with the customer.
The installing technician is responsible that all personnel are
fully trained and familiar with the equipment's capabilities and
limitations before the installation is considered complete.
 All electrical assemblies must be returned intact for replacement credit using the
standard procedures.
 At the time of installation, all electronic and mechanical adjustments are considered to
be part of the installation, and are included in the installation charge(s).
 The AC receptacle/outlet shall be located near the Indicator and easily accessible.
 Electrical connections other than those specified may not be performed.
2.2.1. Service technician’s responsibilities
 All electronic and mechanical calibrations and/or adjustments
required for making this equipment perform to accuracy and
operational specifications are considered to be part of the
installation.
 They are included in the installation charge.
 Only those charges which are incurred as a result of the
equipment's inability to be adjusted or calibrated to
performance specifications may be charged to warranty.
 The equipment consists of printed circuit assemblies which
must be handled using ESD handling procedures, and must
be replaced as units.
 Replacement of individual components is not allowed.
 The assemblies must be properly packaged in ESD
protective material and returned intact for replacement
credit per normal procedures.
2.2.2. Users’ responsibility

Absolutely no physical, electrical or program modifications other
than selection of standard options and accessories are to be
made to this equipment.