Fairbanks Aegis Industrial Mild Steel - Manual (Page 11)

Section 2: Company Service Information
08/12 11 51102 Rev. 7
Equipment Checkout
Position the equipment with these points in mind:
Intense direct sunlight can harm the display.
Do not locate near magnetic material or equipment/Indicators which use magnets
in their design.
Avoid areas which have extreme variations in room temperatures. Temperatures
outside the Indicator’s specifications will affect the weighing accuracy of this
product.
Do not load the platform if there is any evidence of damage to the platform or
supporting structure.
Users’ Responsibility
All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability to
be adjusted or calibrated to performance specifications may be charged to
warranty.
Absolutely no physical, electrical or program modifications other than selection of
standard options and accessories are to be made to this equipment.
The equipment consists of printed
circuit assemblies which must be
handled using ESD handling
procedures, and must be replaced as
units.
─ Replacement of individual
components is not allowed.
─ The assemblies must be properly
packaged in ESD protective material
and returned intact for replacement
credit per normal procedures.