Non-metallic design level 2 ball valve, Air-powered double-diaphragm pump, Materials – Blagdon Pump B75 Non-Metallic User Manual
Page 3
s30nmdl2sm-rev0312
Model B75 Non-Metallic Design Level 2 Page 3
CAUTION: Nonmetallic pumps and plastic components are not UV stabilized. Ultraviolet radiation can damage these parts and negatively affect material properties.
Do not expose to UV light for extended periods of time.
Santoprene
®
Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion
212°F
-10°F
resistance.
100°C
-23°C
Virgin PTFE Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE: molten alkali metals, turbulent
liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at
212°F
-35°F
elevated temperatures.
100°C
-37°C
Polypropylene
180°F
32°F
82°C
0°C
B75
Non-Metallic
Design Level 2
Ball Valve
Air-Powered
Double-Diaphragm Pump
ENGINEERING, PERFORMANCE
& CONSTRUCTION DATA
Materials
Maximum
Minimum
Operating Temperatures
For specific applications, always consult “Chemical Resistance Chart” Technical Bulletin
The pumps are designed to be powered only by compressed air.
INTAKE/DISCHARGE PIPE SIZE
3" ANSI Flange or
80mm DIN Flange
CAPACITY
0 to 238 US gallons per minute
(0 to 901 liters per minute)
AIR VALVE
No-lube, no-stall
design
SOLIDS-HANDLING
Up to .71 in. (18mm)
HEADS UP TO
100 psi or 231 ft. of water
(7 bar or 70 meters)
DISPLACEMENT/STROKE
.9 US gallon / 3.41 liter
CAUTION! Operating temperature limitations are as follows:
Air Inlet Side View
Air Exhaust Side View
PVDF
200°F
93°C
10°F
-13°C
Maximum and Minimum Temperatures are the limits for which these
materials can be operated. Temperatures coupled with pressure affect the
longevity of diaphragm pump components. Maximum life should not be
expected at the extreme limits of the temperature ranges.