Select power mode 8. select detector, Select distance between detector and reflector – Fire Fighting Enterprises FIRERAY 5000 User Manual

Page 8

• In ‘Hi A’ mode (default), during

normal operation the system

will take 5.5mA if one Detector

is connected or 8mA if two

Detectors are connected.

During Laser targeting, Auto,

Hand and Home functions, the

system will take 36mA.

• In ‘Lo A’ mode (selected via the

System Controller settings

menu), the system will take

5.5mA or 8mA in ALL modes of

operation. The Detector will

move more slowly during Align,

Laser targeting and Home, so it

is recommended to leave the

system set to ‘Hi A’ if the

current is available.

7. Select Power Mode

8. Select Detector

• Select Detector to be accessed

• All Detectors need to be aligned separately

• Steps 9 to12 explain how to align individual Detectors

9. Select Distance between Detector and Reflector

• Select 8-50m (default) or 100m

(Set for each Detector)