Fire Fighting Enterprises Talentum UV/IR2 Flame Detector - Manual

12
This document is the EExd Flame Detector Installation Guide/2013/Issue 2
1
Flameproof – (EExd)
UV/ IR² Flame Detector
Installation Guide
General
This Installation Guide gives information on the Flameproof (EExd) version of the flame
detectors that have been approved by ISSeP (Institut Scientifique de Service Public; notified
body number:492). The requirements of the European Community Directive 94/9/EC, the
ATmosphere EXplosives ATEX Directive have been met. The approval has been accessed by
reference to the following standards, EN50014:1997+A1 and A2:1999, EN 50018:2000 and pr
AA EN 50018 plus a review against EN60079-1:2004 which showed that there were no
changes which materially affected the “state of technological progress” with respect to the
product. EN50281-1-1:1998
The detector enclosures are certified category II 2 G D, EExd IIC T6 IP66.
The range comprises dual infra-red (IR²), triple infra-red (IR³) and UV/IR² flame detectors. The
detector housings are available in copper free aluminium alloy (LM25) and stainless steel
(316).
The guide also provides information on Flameproof (type‘d’) enclosures, the application,
maintenance, installation and adjustments of the detectors. Reference to other individual
detector publications can be made for more information on none Flameproof issues. These
publications are available on request.
Information in this guide is given in good faith, but the manufacturer cannot be held responsible
for any omissions or errors. The company reserves the right to change the specifications of
products at any time and without prior notice.