Aiwa NSX-MTD9 - Manual (Page 53)

The unit can be turned on at a specified time every day with the built-in timer.
Preparation
Make sure the clock is set correctly.
1 Press one of the function buttons to select a source.
• If TUNER/BAND is pressed, the band cannot be selected in this step.
2 Press TIMER repeatedly until appears on the display.
Time and audio source name flash alternatively.
3 Within 6 seconds, turn MULTI JOG to designate the timer-on time, then press ENTER or .
Turning MULTI JOG changes both the hour and the minute.
or is also available instead of MULTI JOG. Holding these buttons down will vary the time rapidly.
4 Within 4 seconds, turn MULTI JOG to select the duration for the timer-activated period.
The duration can be set between 5 and 240 minutes in 5-minute steps.
or is also available instead of MULTI JOG.