Aiwa NSX-MTD9 - Manual (Page 31)

PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press THUNDERBIRD to select a band.
2 Press numbered buttons 0-9 and +10 to select a preset number.
Example:
To select preset number 15, press +10 and 5.
To select preset number 20, press +10, +10 and 0.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Then, press
repeatedly or turn MULTI JOG.
Each time is pressed, the next higher number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press CLEAR, and press SET within 4
seconds.
The preset numbers of all other stations in the band with higher numbers are also decreased by one.
TAPE PLAYBACK pg. 17
BASIC OPERATIONS
INSERTING TAPES
• On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or both sides.
• Use Type I (normal), Type 11 (high/Cr02) or Type IV (metal) tapes for playback.
Press TAPE/DECK 1/2, then press PUSH EJECT to open the cassette holder.