Teledyne 9070 - O2 and CO2 Food package analyzer (preliminary) - Manual (Page 31)

Setup Alarm Display
Purge
Run
Enter Option Function
Option Function
Autocal
Cal 2 Cal 1
Power Alarm Setup
Oxygen % 2.83
SensorTem p 718C
9070 Oxygen Analyzer Keyboard
5.5
SET-UP FUNCTION DETAILS
Note: The * indicates the default setting after a COLD-START. See Section 6.1
1. Calender year
Options
Select the current year for the real time clock/calender.
The cold start default sets the date and time to the software version date.
2. Calender month
Options
Select the current month for the real time clock/calender.
3. Calender day
Options
Select the current day for the real time clock/calender.
4. Real time clock hour
Options Select the current hour for the real time clock. (24 hour format)
5. Real time clock minutes
Options
Select the current minutes for the real time clock.
6. Reference voltage # 1 ( about 27.5 mV’s )
Options
Set the value of the reference voltage as read on a 3 3/4 digit multimeter (See Section 6.2 for further details).
27.55 mV
*
7. Reference voltage # 2 ( about 194 mV’s )
Options
Set the value of the reference voltage as read on a 3 3/4 digit multimeter (See Section 6.2 for further details).
193.60 mV
*
8. Reference voltage # 3 ( about 1200 mV’s )
Options
Set the value of the reference voltage as read on a 3 3/4 digit multimeter (See Section 6.2 for further details).
1202.00 mV
*
Teledyne Analytical Instruments 9070 Oxygen Analyzer Page 31