Teledyne 9070 - O2 and CO2 Food package analyzer (preliminary) - Manual (Page 29)

SET-UP MODE SUMMARY
5.1 SET-UP MODE FUNCTIONS
1 Calender Year
2 Calender Month
3 Calender Day
4 Real time clock Hour
5 Real time clock Minutes
6 Reference voltage #1
7 Reference voltage #2
8 Reference voltage #3
9 Reference voltage #4
10 Auto oxygen offset, Yes/no
11 Oxygen sensor offset
12 CO
2
auto calibration
13 Output channel number 1, 4-20 or 0-20mA mode
14 Output channel number 2, 4-20 or 0-20mA mode
15 Output channel number 1 calibration
16 Output channel number 2 calibration
17 Service record year
18 Service record month
19 Service record day
20 Transmitter Output Channel 1 scale
21 Transmitter Zero Channel 1
22 Transmitter Span Channel 1
23 Transmitter Output Channel 2 scale
24 Transmitter Zero Channel 2
25 Transmitter Span Channel 2
26 Sample mode
27 Display mode
28 Centigrade/Fahrenheit Selection
29 Lower Line Display Functions
30 Cal Gas, Yes/no
Set-up steps 31 to 37 may be skipped automatically, depending on the selection in set-up step 30.
31 First Calibration Time
32 Oxygen Content of Cal Gas 1
33 Maximum Acceptable Positive Error Gas 1
34 Maximum Acceptable Negative Error Gas 1
35 Period Between Gas 1 Autocals
36 Duration of Autocal Gas 1
37 Freeze Time Gas 1
38 Reset level
39 High oxygen alarm level
40 High oxygen alarm delay time
41 Low oxygen alarm level
42 Low oxygen alarm delay time
43 Very low oxygen alarm level
44 Very low oxygen alarm delay time
45 High carbon dioxide alarm level
46 High carbon dioxide alarm delay time
47 Low carbon dioxide alarm level
48 Low carbon dioxide alarm delay time
49 Alarm relay number 2 function select
Set-up steps 50 an 51 may be skipped automatically if a version 1.6 of the 9070-2 PCB is installed.
50 Alarm relay number 3 function select
51 Alarm relay number 4 function select
Set-up steps 52 an 55 may be skipped automatically if carbon dioxide is installed..
Teledyne Analytical Instruments 9070 Oxygen Analyzer Page 29