Bosch TES50621RW VeroCafe LattePro Machine à café Expresso automatique Titanium - Manual (Page 14)

10
Robert Bosch Hausgeräte GmbH
en
Language
The display language can be set here.
Water hardness
The water hardness setting can be adjusted
on this appliance. It is important to set the
water hardness correctly, so that the appli-
ance indicates accurately when the descal-
ing programme should be run. The factory
setting for the water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip briefly in water, gently
shake off any drips, and check the result
after one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
Drink counter
This displays how many drinks have been
dispensed since the appliance was first put
into operation.
Adjusting the
grinding unit
The rotary selector (3) adjusts the grind
settings from coarse to fine.
¡
Warning!
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
● While the grinding unit is running, adjust
the rotary selector (3) from fine ( a: Turn
anticlockwise) to coarse ( b: Turn clock-
wise) as required.
a b
Note: The new setting will not become
apparent until after the second cup of
coffee.
Note: If the message Please adjust
grinding unit to coarser setting!
appears in the display, the grind setting
for the coffee beans is too fine. Adjust the
grinding unit to a coarser setting.
Tip: For dark roast coffee beans, choose a
finer grind, for lighter beans a coarser grind.