Bosch TES50129RW VeroCafe Machine à café Expresso automatique Noir - Manual (Page 14)

Robert Bosch Hausgeräte GmbH
10 en
Setting the brewing temperature
The brewing temperature can also be set.
1� Turn the rotary
knob (13) to position
2� Press and hold buttons
B
(11) and
A (12) for at least 5 seconds. The set
brewing temperature is indicated by the
number of LEDs that now light up.
3� Now press the start button (10) repeat-
edly until the required number of LEDs
light up to indicate the temperature:
LED D = low
LED
D
and
E
= medium
LED D , E and F = high
4. Press and hold the start button (10) for
at least 5 seconds. The set number of
LEDs will light up to indicate that the
selected temperature has been saved
successfully.
Note: If no button is pressed within
90 seconds, the appliance switches to
stand-by mode without saving the new
settings. In this case, the previously saved
brewing temperature setting is retained.
Adjusting the grind settings
The selector (3) for grind setting adjusts the
grind settings from coarse to fine.
¡
Warning!
Adjust the grinding unit only while it is
r unning! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
● With the grinding unit running, adjust the
selector (3) from fine ( a: turn anticlock-
wise) to coarse ( b: turn clockwise).
a b
Information: The effects of the new grind
setting will not become apparent until after
the second cup of coffee.
Tip: Choose a finer grind for dark roasted
beans and a coarser grind for lighter beans.