Asus CUPLE-VM JumperFree PC133 - Manual (Page 59)

ASUS CUPLE-VM User’s Manual 59
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [Enabled] if
you want to use USB devices. Configuration options: [Disabled] [Enabled]
Primary VGA BIOS [PCI Card]
If your computer has a PCI VGA card and on-board VGA is available, this field
allows you to select which of the VGA devices will act as your primary graphics
controller. The default, [PCI Card], allows your PCI graphics card to take prece-
dence when detected. [On-Board] uses on-board VGA as the primary graphics
controller. Configuration options: [PCI Card] [On-Board]
IRQ XX Reserved for Legacy Device [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is being used
by an onboard legacy (non-PnP) device. The default value indicates either that the
displayed IRQ is not used or that ISA Configuration Utility (ICU) is being used to
determine if a legacy device is using that IRQ. Configuration options: [No/ICU]
[Yes]
PCI/PNP IRQ Resource Exclusion