Hardware setup – Asus CUPLE-VM JumperFree PC133 User Manual
Page 32
32
ASUS CUPLE-VM User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
16) USB Header (10-1 pin USB2)
If the USB port connectors on the back panel are inadequate, this USB header is
available for two additional USB port connectors. Connect the USB headers to
the 2-port USB connector set and mount the bracket to an open slot on your
chassis.
15) Internal Audio Connectors (4-pin CD_IN, AUX, MODEM)
These connectors allow you to receive stereo audio input from such sound sources
as a CD-ROM, TV tuner, or MPEG card. The MODEM connector allows the
onboard audio to interface with a voice modem card with a similar connector.
CUPLE-VM
CUPLE-VM Internal Audio
Connectors
AUX (White)
CD (Black)
MODEM
Modem-Out
Ground
Modem-In
Ground
Right Audio Channel
Left Audio Channel
Ground
Right Audio Channel
Left Audio Channel
Ground
CUPLE-VM
CUPLE-VM USB Port
USBPORT
GND
USBP3+
USBP3–
USB Power
1
5
6
10
NC
GND
USBP2+
USBP2–
USB Power