Asus CUPLE-VM JumperFree PC133 - Manual (Page 26)

26 ASUS CUPLE-VM User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
4) Serial Port Connectors (Teal/Turquoise 9-pin COM1/COM2)
One serial port can be used for pointing devices or other serial devices. An addi-
tional serial p[ort is available using a serial port bracket. To set up these ports,
see Onboard Serial Port 1 in 4.4.2 I/O Device Configuration for settings.
3) Universal Serial BUS Ports 0 & 1 (Black two 4-pin USB)
Two USB ports are available for connecting USB devices. If these are not enough,
a USB header is available for two additional USB port connectors. See USB
Headers later in this section.
Universal Serial Bus (USB) 2
USB 1
5) Monitor Output Connector (Blue 15-pin VGA)
This connector is for output to a VGA-compatible device.
VGA Monitor (15-pin female)
COM 1
Serial Port (9-pin male)
CUPLE-VM Serial COM2 Connector
CUPLE-VM
PIN 1
COM2