Asus CUPLE-VM JumperFree PC133 - Manual (Page 49)

ASUS CUPLE-VM User’s Manual 49
4. BIOS SETUP
4. BIOS SETUP
4.4 Advanced Menu
Advanced
Menu
System/PCI Frequency [MHz]
This field displays the frequency ratio between the System (Front Side Bus)
and the PCI bus. The ratios displayed in this field are auto detected by the
system.
System/DRAM Frequency Ratio [Auto]
This field offers 3 settings for the frequency ratio between the System (Front
Side Bus) and SDRAM. If the FSB Frequency is 66MHz, then the field
offers three configuration options: [Auto] [1/1] [2/3]. If the FSB Frequency
is 100MHz, then the field offers three configuration options: [Auto] [3/2]
[3/4]. If the FSB Frequency is 133MHz, then the field offers three configu-
ration options: [Auto] [1/1] [4/3].
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These field lets you choose from the default of [Enabled] or choose [Dis-
abled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache. Con-
figuration options: [Disabled] [Enabled]
CPU Level 2 Cache ECC Check [Disabled]
This function controls the ECC capability in the CPU level 2 cache. Con-
figuration options: [Disabled] [Enabled]
BIOS Update [Enabled]
This functions as an update loader integrated into the BIOS to supply the
processor with the required data. In the default position of [Enabled], the
BIOS will load the update on all processors during system bootup. Configu-
ration options: [Disabled] [Enabled]