Asus Terminator 2 Barebone System T2-R - Manual (Page 67)

67 ASUS Terminator 2 barebone system
Site Survey
The Site Survey window displays
the available networks within the
wireless LAN adapter range and the
following network settings:
BSSID - The IEEE MAC address of
the available wireless networks.
SSID - SSID (service set identifier) of
the network.
CH - Direct sequence channel used
by the network.
RSSI - Received Signal Strength Indicator (RSSI) in dBm.
Type - wireless network mode. AP indicates an Infrastructure network
type. STA indicates an Ad-hoc network type.
WEP - shows whether a network has an enabled (On) or disabled (Off)
WEP encryption.
Select an available network and click Connect to establish connection.
Click Search to rescan available networks.
About
Click this icon to view the software
version, driver version, and copyright
information.
Link State
The Link State displays the current
connection status of the wireless LAN
adapter to the AP or to other Wi-Fi
devices. An icon represents the Link
State for easy identification. Refer to
the table below for icon indications.
Table of Icon Indications
Excellent link quality (Infrastructure) Not linked (Infrastructure)
Good link quality (Infrastructure) Linked (Ad-hoc)
Fair link quality (Infrastructure) Not linked (Ad-hoc)
Poor link quality (Infrastructure)