Asus Terminator 2 Barebone System T2-R - Manual (Page 58)

58 Chapter 3: Starting up
3.6.1 LED indicators
The wireless LAN adapter comes with a
Data Transmission (Green AIR) and
Network Link (Yellow LINK) LED
indicators. Refer to the table below for
LED indications.
3.6.2 Antenna installation
Connect the dipolar antenna to the antenna connector (male) of the
wireless LAN adapter before installing the drivers and utilities.
Place the antenna on an elevated location to receive or transmit better
signal. Do not place the antenna under your table or in a closed
compartment.
AIR LINK Indications
Fast Blink ON The wireless LAN adapter is on and is transmitting/receiving data.
ON ON The wireless LAN adapter is on but no data activity.
OFF OFF The wireless LAN adapter is off or disabled.
Blink OFF The wireless LAN adapter is not connected to a wireless network.
LINK LED
AIR LED