Asus Terminator 2 Barebone System T2-R - Manual (Page 63)

63 ASUS Terminator 2 barebone system
Status - Ping tab
The Ping tab allows you to verify the
connection of the host computer with
another computer in the network. To
ping a connection:
1. Type the IP address of the
connection you want to verify in
the IP Address field.
2. Configure the ping session by
assigning the size and count of
packet to send, and the time
limit for a ping session to continue (in milliseconds).
3. Click the Ping button.
During the ping session, the Ping
button toggles into a Stop button.
Click Stop anytime to cancel the
ping session.
The session field displays
information on the verified
connection including the roundtrip
time (minimum, maximum, and
average) packets sent, received, and
lost after a ping session.
Click the Clear button to clear the
ping session field.
Config - Basic tab
The Basic tab provides general
information on network types and
other configurations.
Network Type. Select the type of
network that you wish to use. Select
Infrastructure mode to establish a
connection with an access point
(AP). In this mode, your system can
access wireless LAN and wired LAN
(Ethernet) via the AP. Select the
Ad
Hoc mode to communicate directly
with other wireless clients within the adapter operating range.