Maintenance, General recommendations, Before each use – Poulan Pro PB38 LAWN TRACTOR User Manual
Page 17

44
CONSEJOS PARA CORTAR EL CÉSPED
• La cortadora de césped debe estar bien
nivelada para que su desempeño sea el
mejor. Consulte la parte de “NIVELACIÓN
DE LA CARCASA DE LA CORTADORA DE
CÉSPED” en la sección de Servicio y Ajustes
de este manual.
• El lado izquierdo de la cortadora de césped
se debe usar para po dar.
• Conduzca de manera que los recortes de des-
carguen sobre el área que ya se ha cortado.
El área de corte debe estar del lado derecho
de la cortadora de césped. Esto creará una
dis tri bu ción más uniforme de los recortes y
un corte más uniforme.
• Cuando corte áreas grandes, comience
girando hacia la derecha, de modo que los
recortes se descarguen lejos de los arbustos,
bardas, caminos, etc. Después de una o dos
vueltas, corte en la dirección opuesta, dando
vueltas hacia la izquierda hasta que termine.
• Si el césped está demasiado alto, se deberá
cortar dos veces para reducir la carga y la
posibilidad de un peligro de incendio por los
recor tes secos. Haga el primer corte relativa-
mente alto; el segundo deberá ser a la altura
deseada.
• No corte el césped cuando esté húmedo. El
césped húmedo taponará la cortadora de
césped y dejará matas indeseables. Permita
que el césped se seque antes de podarlo.
• Reg
u le la velocidad terrestre al se lecc ionar un
avance lo suficientemente lento para ajustar
el des empeño de co rt e de la cortadora de
césped así como la calidad del corte deseada.
• Cuando utilice accesorios, se leccione una
velocidad terrestre que se adapte al terreno
y obtenga el mejor desempeño del ac ceso rio
que esté usando.
17
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lu bri cants will attract dust and dirt
that will short en the life of the self-lu bri cat ing
bearings. If you feel they must be lu bri cat ed,
use only a dry, pow dered graphite type
lu bri cant spar ing ly.
GENERAL RECOMMENDATIONS
The warranty on this riding mower does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
main tain riding mower as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your rid-
ing mower.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blade and belt for wear. A new
spark plug and clean air filter assure proper
air-fuel mixture and help your engine run
better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
E
N
G
I
N
E
3
4
2
2
2
3 - Replace blade more often when mowing in sandy soil.
4 - Clean surfaces with isopropyl alcohol or non filming cleaner.
2
1,2
BEFORE
EACH
USE
EVERY
8
HOURS
EVERY
25
HOURS
EVERY
50
HOURS
EVERY
100
HOURS
EVERY
SEASON
BEFORE
STORAGE
Inspect Muffler/Spark Arrester
Clean Air Filter
Replace Air Filter Paper Cartridge
Replace Spark Plug
Check Engine Oil Level
Clean Engine Cooling Fins
Clean Air Screen
Change Engine Oil
Check Brake Operation
Check Tire Pressure
Clean Battery and Terminals
MAINTENANCE
SCHEDULE
Check for Loose Fasteners
Check/Replace Mower Blade
Clean Friction Surfaces
Lubricate Axles and Spindles
Adjust Clutch
Che
Check Operator Presence & ROS Systems
ck V-Belt
Check Mower Levelness
2
)
$
)
.
'
-
/
7
%
2
MAINTENANCE