Pach and Company AeGIS NPB7000 Series Manual - Manual (Page 24)

AeGISNPB7000P Page 24
1. Establish a communication
2. Warning beep will be heard 10 minutes before
the talk time expired.
3. Press # to extend the talk time
G. How to call into the system You must know the system’s phone number
1. Call the system’s phone number
2. The system will answer between 2
nd - 4 th rings,
then BEEP BEEP! will be heard
3. Press to establish communication
4. Press 9 to release the door.
H. How to use the 4-digit access code to open
the door 1. Press , the welcome screen will stop
scrolling otherwise repeat this step.
2. Press 4-digit valid access code.
I. How to increase or decrease the display’s
intensity
1. Locate the display intensity adjustment see
figure 2.1, p11
2. Turn
counter clockwise to increase or
clockwise to decrease
J. How to increase or decrease the speaker’s
volume
1. Locate the speaker’s volume adjustment see
figure 2.1, p11
2. Turn
counter-clockwise to increase or
clockwise to decrease
K. How to check the total tenant’s directory in
the system
Use Function code 91, see chapter 3, p23
L. How to check my system model number Use Function code 46, see chapter 3, p20
WARNING: SYSTEM WILL BE
DISABLED FOR 90 SECONDS IF INVALID
ACCESS CODE HAS BEEN ENTERED
ACCORDING TO THE SETTING OF LOCK-OUT
COUNT (FUNCTION CODE 72, p19)