Pach and Company AeGIS NPB7000 Series Manual - Manual (Page 20)

AeGISNPB7000P Page 20
40
MASTER CODE MASK
0= Unmask
1=Mask
Default is Unmasked
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 15
1. Enter function code 40 then press #
2. Select 0=Unmask or 1=Mask then press #
46
FIRMWARE VERSION
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 15
1. Enter function code 46 then press #
V:7150 is model number 7150P
01/28/11 is firmware release date
50
ERASE MEMORY TO FACTORY DEFAULT
SETTING
1= Erase
0= Cancel
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 15
1. Enter function code 50 then press #
2. Press 1= erase or 0= cancel then press #
51
ENABLE NO PHONE BILL
0= Dedicated phone line
1= no phone bill
Default is 0
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 15
1. Enter function code 51 then press #
2. Press 0= dedicated phone line or 1= no phone
bill then press #
MC_MASK 1=YES:0
WARNING: MASKING THE MASTER CODE
WILL DISABLE THE RETRIEVAL BUTTON. THERE
ISN’T A WAY TO RECOVER THE MASTER CODE.
PACH AND COMPANY WILL NOT COVER THE
WARRANTY IF THE MASTER CODE HAS BEEN
FORGOTTEN.
IF YOU ARE THE INSTALLER DO NOT MASK THE
MASTER CODE.
V:7150 01/28/11
1 to Confirm: _
WARNING: SYSTEM WILL BE RESTORED TO
FACTORY DEFAULT, ALL DATABASES WILL BE
ERASED, NO WAY TO RECOVER.
NPB [0 1]:0