System information: security level – DoorKing 2348 Elevator Control User Manual
Page 30
System Information: Security Level
Programming of Floor Button Access for building tenants is done in the Security Level Screen. Each
resident is assigned to one of the programmed security levels. Within each security level, you select
which floor or floors they will have access to and if any time zone restrictions will apply. This does
not affect visitor elevator control.
•
Security Level 01 DOES NOT PROVIDE ELEVATOR CONTROL FUNCTIONS. This
security level provides 24/7 access at all reader locations. However, elevator commands will
not be sent from the phone system to elevator board.
•
Security Level 02, time zone (TZ) 1. Programmed for 24 hr, 7 day access.
•
Relays - To program Elevator Control, select the relays that reference the card readers
located inside the elevator cars. In this case, relays 4, 7 & 8.
•
Floors - To program floor level control, select which floors will be included within this time
zone. The example shows that Floors P1, 2, 3 & 4 will be provides with 24hr, 7 day access.
Page 30
2348-065-E-10-11