DoorKing 1819 Information Phone - Manual (Page 23)

1819-065-B-4-07
3.1.4 Tone Open Numbers
These steps will program the tone open numbers for relay 1. You will need to enter a four-digit
number (see chart below) to set the relay functions. If a function is not desired, enter # in place of a
number. For example, if you want the relay to have a momentary activation function only, and you
want the relay to activate when the number 9 is pressed, enter 9 # # # in step 3. Do not duplicate
tone open numbers.
Factory setting is 9876.
1. Press *05 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2. Press 1* to set tone numbers (beep).
3. Enter the four-digit tone open number code _ _ _ _ then press * (beep).
4. Press 0# TOGETHER to end this programming step (beeeeeep).
DIGIT FUNCTION
1 Momentary activation. Relay will activate for the programmed strike time (3.1.3).
2 Relay hold. Relay will activate and remain activated until commanded to release.
3 Relay release. Deactivates the relay hold command.
4 Relay hold 1-hour. Relay will activate for 1-hour and then will automatically deactivate itself.
3.1.5 Touch-tone / Rotary-dial
This programming sequence will set the telephone entry system to dial out in either a touch-tone or
rotary format. Generally, this will be set for touch-tone.
Factory setting = 0 (touch-tone).
1. Press *07 and enter the four digit MASTER CODE _ _ _ _ (beep).
2. Enter 0* (beep) for touch-tone or enter 1* (beep) for rotary.
3. Press 0# TOGETHER to end this programming step (beeeeeep).
3.1.6 Number of Rings to Answer
This programming sequence sets the number of rings to allow before the telephone entry system
answers a call placed to it. This programming sequence does not affect the number of times that a
resident’s telephone will ring when a call is placed from the entry system to the resident.
Factory setting = 02 (two rings).
1. Press *18 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2. Enter the number of rings _ _ then press * (beep).
3. Press 0# TOGETHER to end this programming step (beeeeeep).
Page 23