11 a 11 b – Dixon Valve 100 TON RAM Complete Manual User Manual
Page 38
100 Ton Ram Instruction Manual
Cam & Groove Holedall Couplings
customer service
800
•
355
•
1991
4
Section 5
Lifting up the hose, insert one die half under the
hose. Lower the hose so that it rests on the die.
Insert the other die half. Make sure that the seams
of the die do not line up with the seams on the die
holders.
While holding the die in place with one hand, place
one of the tie down bars over the die so that it does
not come out of the die holder unexpectedly. Secure
the tie down bar by tightening the bolt.
For style "C" couplings go to step 12.
For style "E" couplings go to step 13.
11a
11b
See also other documents in the category Dixon Valve Tools:
- Safety Opening Minds (2 pages)
- SOS van (2 pages)
- Railcar Unloading assemblies (1 page)
- One Piece 8 Frac Fitting" (2 pages)
- Newsletter:February:Search:Safety (2 pages)
- Literature Order Form (1 page)
- KC CW 2014 (1 page)
- Flotech FT470 (1 page)
- F40 tool (2 pages)
- F38 tool (2 pages)
- F175 tool (2 pages)
- F100 tool (2 pages)
- F1 Tool (2 pages)
- CW CH Reg April 2014 (1 page)
- C2 tool (2 pages)
- 51960 tool (2 pages)
- Coupling Inserter CI96 (2 pages)
- CI9 Large Diameter Coupling Inserter (2 pages)
- Manual crimper for Brass ferrules: 860 and 855 (2 pages)
- CM400 crimper (2 pages)
- 5111A Brass Ferrule Crimper (4 pages)
- 1765A Brass Ferrule Crimper (5 pages)
- HB Coupling Expander (6 pages)
- 15 TON RAM Internal Expanded Holedall Petroleum (5 pages)
- 15 TON RAM Internal Expanded Carbon And Stainless Couplings (4 pages)
- 15 TON RAM - Parts List (4 pages)
- 25 TON RAM SEC10 Parts and Attachments (12 pages)
- 50 TON RAM SEC09 Internal Expanded Holedall Petroleum (3 pages)
- 25 TON RAM SEC08 Product Updates (4 pages)
- 25 TON RAM SEC07 Holedall Petroleum IX (4 pages)
- 25 TON RAM SEC06 Internal Expanded Carbon Stainless Couplings (5 pages)
- 25 TON RAM SEC05 Converting (4 pages)
- 25 TON RAM SEC04 External Swaged Cam and Groove (8 pages)
- 25 TON RAM SEC03 External Swaged RST and GAS (5 pages)
- 25 TON RAM SEC02 External Swaged Holedall (6 pages)
- 25 TON RAM SEC01 Holedall Fittings (35 pages)
- 25 TON RAM Complete Manual (89 pages)
- 50 TON RAM SEC10 Parts And Attachments (5 pages)
- 50 TON RAM SEC08 Internal Expanded Carbon And Stainless Couplings (5 pages)
- 50 TON RAM SEC07 Converting (3 pages)
- 50 TON RAM SEC06 External Swaged Ground Joint (7 pages)
- 50 TON RAM SEC05 External Swaged Cam And Groove (12 pages)
- 50 TON RAM SEC04 External Swaged RST and GAS (6 pages)
- 50 TON RAM SEC03 External Swage Holedall with Jackscrews (8 pages)
- 50 TON RAM SEC02 External Swaged Holedall (6 pages)