Dixon Valve CM400 crimper - Manual

HOLEDALL
Dixon introduces a new dimension in permanently attached fittings
with the new Holedall Crimp System.
Dixon
Holedall Crimp System
Complete Crimp System Contains:
• 1 - Crimp 400 machine
• 1 - Digital control panel
• 1 - Mechanical stop
• 1 - Stand with foot pedal and die holder panel
• 11 - Small die sets from 1.02" - 3.07"
• 8 - Large die sets from 3.31" - 4.96"
Note: large dies are not stored on the stand
• Quick change die tool
• Master die I.D. (standard): 145 mm
• Crimping force: 265 tons
• Maximum hose diameter: 4" I.D.
• Maximum die travel: 2.36"
• Maximum die opening without dies: 7.16"
Length: 29"
Width: 20"
Height: 32"
Weight: 579 lbs.
• Electrical power (standard): 230V 3Ph
• Optional:
Electrical power: 440V 3 Ph
Electrical power: 220V 1 Ph
Pump HP: 7.5 HP
• Manual / fully automatic crimping
• Inch / metric settings
• Approximate crimps per hour: 1415